Explorar las categorías
Explora
Fiverr Pro
Español
$
USD
Diseñaré esquemas y pcb en altium,eagle,pads, kicad,proteus y diptrace.
Gerente de hardware
Soy un ingeniero de diseño de hardware talentoso y experimentado. Tengo buena experiencia con el diseño de PCB y he trabajado como diseñador de diseño de PCB durante muchos años. Soy muy trabajador y ...
Los compradores siguen regresando
Smartelectro tiene una cantidad excepcional de compradores recurrentes
Nivel 2
Ha cumplido con los criterios de alto rendimiento y tiene un historial comprobado de cumplimiento de las expectativas de los clientes.
Con alta capacidad de respuesta
Conocido por sus respuestas excepcionalmente rápidas
Qué le encantó a la gente de este freelancer
jezewski
Estados Unidos
Excellent work from start to finish. Delivered exactly what was asked, on time, with complete source files and clean documentation. Handled revision requests...
seekffm
Alemania
Outstanding quality: The PCB layout was optimized flawlessly. The final Gerber files worked perfectly right from the start during production. Fast turnaround:...
alialanssari916
Catar
Great experience working with him. He was professional, easy to communicate with, delivered everything on time, and provided all the required design and manufacturing...
ableami
Estados Unidos
I am completely unschooled in pcb boards. Electrpro was patienty and made valuable suggestions. I will certainly depend and rely on him again
Acerca de este Servicio
Hola
Si está buscando un diseñador de PCB, un diseñador de esquemas, un desarrollador de firmware y un diseñador de moldes en 3D, entonces se encuentra en el lugar correcto. Puedo proporcionar circuitos esquemáticos completos, diseño de PCB, archivos Gerber, BOM, Pick and place, taladro NC e incluso prototipos terminados. Tengo 8 años de experiencia en el campo de la ingeniería electrónica.
He diseñado muchos productos estándar militares que siguen las normas y reglamentos de IPC. He diseñado una placa PCB de hasta 16 capas con control de impedancia y coincidencia de longitud.
También puedo;
Proporcione un modelo 3D del circuito terminado.
Archivo fuente o PDF o ambos según su solicitud
Modelos 3D del circuito.
Archivos Gerber, lista de materiales
También puedo hacer ingeniería inversa de tableros.
Trabajo con las suites de software de automatización de diseño electrónico más comunes:
Diseñador Altium
KICAD
ALMOHADILLAS
Águila de escritorio automático
Proteo
Fritzing
DipTrace
Seleccione uno de los siguientes paquetes según sus necesidades y envíeme un mensaje o una solicitud personalizada.
Antes de realizar el pedido, primero confirme si puedo hacer su trabajo o no.
Gracias
Mi porfolio
Otros servicios de Ingeniería electrónica que ofrezco
Reseñas
385 comentarios sobre este Servicio
| (364) | ||
| (17) | ||
| (0) | ||
| (0) | ||
| (4) |
Desglose de calificaciones
- Nivel de comunicación del Freelancer
- Calidad de la entrega
- Valor de la entrega
Ordenar por
Más relevante
J 
jezewski
Estados Unidos
Colaboración continuaExcellent work from start to finish. Delivered exactly what was asked, on time, with complete source files and clean documentation. Handled revision requests quickly and correctly on the first pass — including gracefully fixing items that stemmed from my own spec errors. Communicative, detail-oriented, and technically sharp. Will absolutely work with again.
USD 200-USD 400
$
8 días
Tiempo
S 
Respuesta del Freelancer
Útil?A ableami
Estados Unidos
Pedido cancelado
Electropro is not capable of doing a project like i asked. He blamed me and AI and kept sayin why would he lie to me? i didnt think he was lieing, he just dint understand what he was doing and didnt take any responsibility for his failures
USD 50-USD 100
$
3 días
Tiempo
Útil?S seekffm
Alemania
Outstanding quality: The PCB layout was optimized flawlessly. The final Gerber files worked perfectly right from the start during production. Fast turnaround: The order was processed incredibly quickly and delivered well ahead of the deadline. Great communication: Interactions were consistently friendly,...
USD 100-USD 200
$
3 días
Tiempo
S Respuesta del Freelancer
Útil?A alialanssari916
Catar
Great experience working with him. He was professional, easy to communicate with, delivered everything on time, and provided all the required design and manufacturing files. His pricing was also very reasonable for the quality of work. Would definitely work with him again.
USD 200-USD 400
$
7 días
Tiempo
S Respuesta del Freelancer
Útil?A ableami
Estados Unidos
I am completely unschooled in pcb boards. Electrpro was patienty and made valuable suggestions. I will certainly depend and rely on him again
USD 800-USD 1,000
$
3 semanas
Tiempo
S Respuesta del Freelancer
Útil?
Reseñas
385 comentarios sobre este Servicio
| (364) | ||
| (17) | ||
| (0) | ||
| (0) | ||
| (4) |
Desglose de calificaciones
- Nivel de comunicación del Freelancer
- Calidad de la entrega
- Valor de la entrega
Ordenar por
Más relevante
J jezewski
Estados Unidos
Colaboración continuaExcellent work from start to finish. Delivered exactly what was asked, on time, with complete source files and clean documentation. Handled revision requests quickly and correctly on the first pass — including gracefully fixing items that stemmed from my own spec errors. Communicative, detail-oriented, and technically sharp. Will absolutely work with again.
USD 200-USD 400
$
8 días
Tiempo
S Respuesta del Freelancer
Útil?A ableami
Estados Unidos
Pedido cancelado
Electropro is not capable of doing a project like i asked. He blamed me and AI and kept sayin why would he lie to me? i didnt think he was lieing, he just dint understand what he was doing and didnt take any responsibility for his failures
USD 50-USD 100
$
3 días
Tiempo
Útil?S seekffm
Alemania
Outstanding quality: The PCB layout was optimized flawlessly. The final Gerber files worked perfectly right from the start during production. Fast turnaround: The order was processed incredibly quickly and delivered well ahead of the deadline. Great communication: Interactions were consistently friendly,...
USD 100-USD 200
$
3 días
Tiempo
S Respuesta del Freelancer
Útil?A alialanssari916
Catar
Great experience working with him. He was professional, easy to communicate with, delivered everything on time, and provided all the required design and manufacturing files. His pricing was also very reasonable for the quality of work. Would definitely work with him again.
USD 200-USD 400
$
7 días
Tiempo
S Respuesta del Freelancer
Útil?A ableami
Estados Unidos
I am completely unschooled in pcb boards. Electrpro was patienty and made valuable suggestions. I will certainly depend and rely on him again
USD 800-USD 1,000
$
3 semanas
Tiempo
S Respuesta del Freelancer
Útil?
