I will emergency lighting according to nfpa 101 life safety code

NFPA 101 Section 7.9 requires emergency lighting systems to operate automatically for a minimum of 1.5 hours (90 minutes) during power failures, providing an average of 1 foot-candle (10.8 lux) of illumination along the path of egress. These systems must be tested monthly for 30 seconds and annually for 1.5 hours, with written records maintained

Key Requirements :

• Duration: Minimum 90 minutes of illumination upon power failure.
• Illumination Levels: Average of 1 foot-candle (10.8 lux) initially, not less than 0.1 foot-candle (1.1 lux) at any point.
• Degradation: After 1.5 hours, levels may decline to an average of 0.6 foot-candle (6.5 lux).

Locations Required:

• Exit stairways, corridors, and passageways.
• Interior aisles and ramps.
• Exterior exit discharges.
• Near doors equipped with delayed egress locks. 

Getting after completed project:

• Real luminaires for lighting design
• False color detection
• 3D models
• General/Energency lighting
• Working/Sufrace area calculation
• Anti-panic surface calculation
• Unified Glare Rating (UGR)
• Calculation object with summary reports.
• Documentation