Diseñaré electrónica, diseño de PCB multicapa y esquemas de circuitos, altium, kicad

Parte de la información se ha traducido automáticamente.
5.0
5.0

Estados Unidos

Hablo Inglés, Alemán, Árabe, Coreano, Italiano, Francés, Español, Chino

5 pedidos completados

Diseñador de productos e ingeniero en electrónica

Hola, soy Ethan, un diseñador de productos e ingeniero en electrónica que ayuda a startups y empresas a convertir ideas en productos fabricables. Me especializo en diseño industrial, diseño mecánico, ...

Qué le encantó a la gente de este freelancer

Acerca de este Servicio

¡Hola!


Me especializo en diseños de PCB de múltiples capas, desde placas sencillas hasta diseños complejos con varias capas que involucran impedancia controlada, pares diferenciales, señales de alta velocidad y rutas de señales mixtas. Destaco en crear diseños profesionales de PCB para microcontroladores, electrónica general y diseños RF con rutas de impedancia controlada.


Placa de circuito impreso:

  • PCB de una capa, doble capa y multilámina
  • Captura de esquemas y desarrollo de circuitos
  • Diseño de PCB con rutas y puesta a tierra optimizadas
  • PCB de alta velocidad
  • PCB para electrónica de potencia
  • Consideraciones de integridad de señal y EMI/EMC
  • Diseño para manufactura (DFM)


Diseño de circuitos:

  • Circuitos analógicos y digitales
  • Sistemas basados en microcontroladores (STM32, ESP32, Arduino)
  • Hardware embebido
  • Desarrollo de fuentes de alimentación y convertidores DC-DC
  • Circuitos de interfaz de sensores
  • Desarrollo de electrónica personalizada


Mis servicios incluyen:

  • Esquema de circuito
  • Archivo Gerber
  • Lista de materiales (BOM)
  • Archivo de pick and place
  • Diseño de montaje
  • Modelo 3D
  • Informes DRC/ERC
  • Archivos de diseño fuente


Utilizo: Altium Designer, EasyEDA, Fusion 360, KiCad


Especificaciones:

  • 2 a 12 capas
  • Componentes THT y SMT
  • PCB rígido-flexible
  • Cualquier dimensión, forma y tamaño


También hago ingeniería inversa de PCBs


Envía los detalles de tu proyecto.

Especialización:

Diseño de circuitos

Esquemas

Disposición

Huella

Formato de archivo:

Gerber

STEP

BRD

SCH

PDF

Software:

Altium Designer

Eagle CAD

EasyEDA

Fusion 360

KiCad

Interfaz:

HDMI

MIPI DSI/CSI

I2S

TDM

UART

USB

SPI

I2C

SDIO

PCIe

Wi-Fi

BT

Mi porfolio

Otros servicios de Ingeniería electrónica que ofrezco

Reseñas

5 comentarios sobre este Servicio
5.0

(5)
(0)
(0)
(0)
(0)
Desglose de calificaciones
  • Nivel de comunicación del Freelancer
    5
  • Calidad de la entrega
    5
  • Valor de la entrega
    5
Ordenar por
Más relevante
  • M

    marpack_

    US

    Estados Unidos

    Colaboración continua
    5

    Compact Smartwatch PCB Design & Prototyping Working with Ethan and his team was a positive experience overall. They were responsive, technically capable, and open to adjustments as the project evolved. As is common in development, the work progressed through multiple refinement stages, and the team...

    USD 50

    $

    2 días

    Tiempo

    Útil?
    No
  • B

    burukuorder

    CA

    Canadá

    Colaboración continua
    5

    DSP Main Board PCB Development I've used this guy for several PCB layout projects, and the results have been excellent. Their layouts are clean, manufacturable, and well thought out. They communicate throughout the project, respond quickly to questions, and consistently identify design issues before...

    USD 50

    $

    2 días

    Tiempo

    Útil?
    No
  • B

    burukuorder

    CA

    Canadá

    Colaboración continua
    5

    Compact Smartwatch PCB Design & Prototyping Working with Ethan was a positive experience overall. He's responsive, technically capable, and open to adjustments as the project evolved. As is common in development, the work progressed through multiple refinement stages, and he remained engaged and adaptable...

    USD 50

    $

    5 días

    Tiempo

    Útil?
    No
  • M

    marpack_

    US

    Estados Unidos

    Colaboración continua
    5

    Acelerometer Compact Motion-Tracking Sensor Node Design with bluetooth and memory Communication was always prompt and efficient. He is very professional, and we were delighted with the end result. We will continue to work with him on future projects. This guy is very dedicated and hard working. He...

    USD 50

    $

    3 días

    Tiempo

    Útil?
    No
  • B

    burukuorder

    CA

    Canadá

    Colaboración continua
    5

    Ethan did a fantastic job designing a complicated networked LED control board for our project given a detailed specification document. He additionally took time to do some detailed revisions for a small additional fee after we discovered an issue with our original specifications. I recommend working with him and may collaborate with him again in the future!

    USD 50

    $

    2 días

    Tiempo

    Imagen de muestra de trabajo
    Útil?
    No
Reseñas

5 comentarios sobre este Servicio
5.0

(5)
(0)
(0)
(0)
(0)
Desglose de calificaciones
  • Nivel de comunicación del Freelancer
    5
  • Calidad de la entrega
    5
  • Valor de la entrega
    5
Ordenar por
Más relevante
  • M

    marpack_

    US

    Estados Unidos

    Colaboración continua
    5

    Compact Smartwatch PCB Design & Prototyping Working with Ethan and his team was a positive experience overall. They were responsive, technically capable, and open to adjustments as the project evolved. As is common in development, the work progressed through multiple refinement stages, and the team...

    USD 50

    $

    2 días

    Tiempo

    Útil?
    No
  • B

    burukuorder

    CA

    Canadá

    Colaboración continua
    5

    DSP Main Board PCB Development I've used this guy for several PCB layout projects, and the results have been excellent. Their layouts are clean, manufacturable, and well thought out. They communicate throughout the project, respond quickly to questions, and consistently identify design issues before...

    USD 50

    $

    2 días

    Tiempo

    Útil?
    No
  • B

    burukuorder

    CA

    Canadá

    Colaboración continua
    5

    Compact Smartwatch PCB Design & Prototyping Working with Ethan was a positive experience overall. He's responsive, technically capable, and open to adjustments as the project evolved. As is common in development, the work progressed through multiple refinement stages, and he remained engaged and adaptable...

    USD 50

    $

    5 días

    Tiempo

    Útil?
    No
  • M

    marpack_

    US

    Estados Unidos

    Colaboración continua
    5

    Acelerometer Compact Motion-Tracking Sensor Node Design with bluetooth and memory Communication was always prompt and efficient. He is very professional, and we were delighted with the end result. We will continue to work with him on future projects. This guy is very dedicated and hard working. He...

    USD 50

    $

    3 días

    Tiempo

    Útil?
    No
  • B

    burukuorder

    CA

    Canadá

    Colaboración continua
    5

    Ethan did a fantastic job designing a complicated networked LED control board for our project given a detailed specification document. He additionally took time to do some detailed revisions for a small additional fee after we discovered an issue with our original specifications. I recommend working with him and may collaborate with him again in the future!

    USD 50

    $

    2 días

    Tiempo

    Imagen de muestra de trabajo
    Útil?
    No